Gate valves

Gate Valves are widely used in fluid-handing systems for flow control, Typical gate valves are designed to be fully opened or closed. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.

2029	2054 STANILESS STEEL	2054 CABON STEEL
Screwed End Gate Valves	Flanged End Gate Valves	Flanged End Gate Valves
1/4″~3″ (DN8~DN80) W. P.: 200WOG W. T.:-20℃ ~200℃ (-4℉~392℉) Investment casting Non-rising stem Thread type: ASME B1.20.1 (NPT), DIN 2999 & BS21, ISO7/1 & EN10226	1/2″~36″ (DN15~DN900) W. P.: PN10/16/25/40 CLASS 150/300/600/900/1500 W. T.:-20℃ ~200℃ (-4℉~392℉) Investment casting Rising stem	2″~48″ (DN50~DN1200) W. P.: CLASS 150/300/600/900 /1500/2500 W. T.:-20℃ ~400℃ (-4℉~752℉) Design:API 600 Flange Dimension:ASME B16.5 Face to Face: ASME B6.10 Rising stem

Manual Type cast Iron Knife Gate Valve	Manual Type Stainless Knife Gate Valve
2092-01	2092-02
Pneumatic Type Knife Gate Valve	Pneumatic Type Stainless Knife Gate Valve
2092-03	2092-04
Electric Motor Type Knife Gate Valve	Pneumatic Type Knife Gate Valve
2092-05	2092-06
Pneumatic Add Manual Type Knife Gate Valve	Pneumatic Type Stainless Steel Knife Gate Valve
2092-07	2092-08
Pneumatic Type Stainless Knife Gate Valve	Pneumatic Type Cast Iron Knife Gate Valve
2092-09	2092-10
Manual Type Cast Iron Knife Gate Valve	Pneumatic Type Knife Gate Valve
2092-11	2092-12
Pneumatic Type Stainless Knife Gate Valve	Pneumatic Type Cast Steel Knife Gate Valve
2092-13	2092-14

Special Features

• Our Gate Valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel.
• Straight through bore design assures streamlined, minimum turbulence, less erosion, lower pressure drop, & resistance to flow.
• Anti- friction bearings are provided in higher sizes and classes.
• Bi-directional shut-off.
• Deep stuffing box.
• The Seat rings are cylindrical bottom seated type having ample cross section for strength will provided with welded in and threaded Seat-rings will be supplied on request. Integral seat ring provides in SS valves.
• Gate Valves are available in 150#, 300# & 600#.
• Universal trim: 13Cr stem, wedge in CA 15 or 13Cr faced is also available.
• Flexible wedge with low center stem wedge contact, in solid CA15 (13 % Cr) or hard faced with 13% Cr, SS 316, & Monel. Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage, Non-rotating stem with precision Acme threads and burnished finish.
• The two inclined seats allow for tight shut off even against high pressures. Renewable Seat Rings Welded or Threaded.
• Gate Valves are of flexible wedge, outside screw and-yoke and bolted-bonnet construction. The valves confirm to API 600.

Options in Gate Valves

• Locking arrangement.
• Valve Bypass arrangements is optionally available.
• Different types of operating selections are available in Gear, Electrical, Hydraulic or Pneumatic actuator, and Lever or gear with chain operated.
• Solid, flexible, split wedge, double disc and parallel Slide Gate configurations.
• For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364.
• Gate valves are adequate for all service media along with NACE applications.
• Other flange drilling are also available on request.

Dimension

• Dimensions and other engineering data are subjected to change without notice.
• Other flange drilling also available on request.

Other Types of Gate Valves

Flanged Gate Valve

Zoloto Flanged Gate Valve

Cast Steel Flanged Gate Valve

Cast Steel Flanged End Gate Valves

Flanged Ends Gate Valve Investment casting