Globe valves is very suitable for control the medium, because of this type of valve’s stem opening or closing at a short trip, and it has very reliable breaker function. Therefore, this type of valve is suitable for cutting, adjusting and throttling the medium.
Anti- friction bearings are provided in higher sizes and classes.
Universal trim: 13Cr stem, wedge in CA 15 or 13% Cr faced is also available.
Our globe Valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with rising hand wheel.
Straight through bore design assures streamlined, minimum turbulence, less erosion, lower pressure drop, & resistance to flow.
Deep stuffing box.
The Seat rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. Integral seat ring provides in SS valves.
Globe Valves are available in 150#, 300# & 600#.
Back Seat arrangement to provide isolation of
Stuffing Box for On-Line serviceability.
Excellent sealing against increased line pressure.
Options in Globe Valves
Locking arrangement.
Valve Bypass arrangements is optionally available.
Different types of operating selections are available in Gear, Electrical, Hydraulic or Pneumatic actuator, and Lever or gear with chain operated.
For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364.
Angle and Y type design.
Spiral wound Gasket for critical service and hazardous media.
Regulating, guided and soft seated plug available. Quick Lead Times.
Globe valves are adequate for all service media. Valves are marked with flow direction since they are recommended to install with flow and pressure under the disc. It can also be installed in reverse condition depending upon the conditions. The globe valve is generally faster to operate due to less travel.
Dimension
Dimensions and other engineering data are subjected to change without notice.
