Forged Steel Gate Valves
Forged steel gate valves are available in three bonnet designs. 2076|
|
|
|
|
Bolted Bonnet |
Welded Bonnet |
Pressure Seal Bonnet |
| ITEM |
| Gate Valve 800Lb |
| Gate Valve 900Lb – 1500Lb |
| Pressure-seal Gate Valve 900Lb – 2500Lb |
Forged Steel Globe Valves
Forged steel globe valves are available in three bonnet designs. 2078  |
 |
 |
|
Bolted Bonnet |
Welded Bonnet |
Pressure Seal Bonnet |
| ITEM |
| Globe Valve 800Lb |
| Globe Valve 900Lb – 1500Lb |
| Pressure-seal Globe Valve 900Lb – 2500Lb |
Forged Steel Check Valves
Forged steel check valves are available in three bonnet designs. 2077  |
 |
 |
| Bolted Bonnet | Welded Bonnet | Pressure Seal Bonnet |
| ITEM |
| Piston Check Valve 800Lb |
| Piston Check Valve 900Lb – 1500Lb |
| Swing Check Valve 800Lb 900Lb -1500Lb |
| Pressure-seal Swing Check Valve 900Lb-2500Lb |
| Pressure-seal Piston Check Valve 900Lb-2500Lb |
Forged Steel Y-PATTERN Valves
Y-Pattern valves are available in three bonnet designs. 2049G  |
 |
 |
| Bolted Bonnet | Welded Bonnet | Pressure Seal Bonnet |
| ITEM |
| Y-Pattern Globe Valve 800Lb |
| Pressure-seal Y-Pattern Globe Valve 900Lb – 2500Lb |
| Y-Pattern Piston Check Valve 800Lb |
Forged Steel Integral Flanged End Valves
forged steel integral flanged end valves are available in three bonnet designs.  |
 |
 |
| Flanged end Globe Valve 2074 | Flanged end Gate Valve 2073 | Flanged end Check Valve 2075 |
Forged steel gate valve / globe valve / check valve
FEATURES Our Forged Steel Valves have been designed to meet the requirements of API 602/BS 5352/ASME B 16.34- Socket weld ends dimensions confirm to ASME B 16.11
- Screwed ends dimensions confirm to ASME B 1.20.1
- Outside screw and yoke construction
- The gland is of two piece self aligning type
- Back seat arrangement for Gate and Globe Valves.
- Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77 / 312
- For low temperature and cryogenic service (cold box and non cold box) extended bonnet as per BS 6364 available
- Welded bonnet construction
- Locking arrangement
- Welded on flanges
Disc Seats and Body Seats
Following are the Trims as per API 600, Table 3 available as our standard. Other material combination available on request.Trim Parts are Defined as follows
Gate Valve- Body & Wedge seating surface, stem, back seat surface Globe Valve- Body & Disc seating surface, stem, back seat surface Check Valve- Body & Disc seating surface, Hinge pinSour Gas Service Materials
For servicing sour gases or other hydrocarbon fluids, SAP cast steel valves may be furnished with materials specially heat treated and hardness controlled in compliance with NACE MR 0175. The shell are WCB with double tempered trim 2 and class II bolting. Other materials and trims are also available on requestGATE VALVE
GLOBE VALVE
LIFT CHECK VALVE
